Korg opsix, Owner'S Manual, Page: 30 / 105

30
Playback and recording on the step sequencer
Here we will play back the sequence data recorded for each program.
1.
Press the PLAY button.
The sequence data recorded for the currently selected program will play.
2.
Press the REC button when you want to record what you play on the keyboard.
The REC button will light up, and all notes that you play afterwards will be recorded as sequence
data. Press the REC button again to finish recording.
3.
To stop sequence data playback, press the PLAY button again.
Any data you record will be lost if you turn off the power on the opsix or select a differ-
ent program before saving the data. See “Saving a program”, p.26.
Step recording
1.
Press the SEQUENCER/FAVORITES button to select SEQ STEPS.
2.
Select a program, and then press the REC button.
The STEP 1 button will blink.
3.
Use the STEP 1–16 buttons to select the steps to input.
The STEP buttons that you select will blink.
4.
Press one or more keys on the keyboard at the same time to record one or more notes at the
current step.
Press one of the STEP 1–16 buttons while holding down a key to record a tie. The tie will connect
the note to the step you pressed.
5.
When the set number of steps have finished recording, step recording will automatically end (the
REC button will go dark).
Press the REC button during recording to stop recording midway.
6.
After you have finished recording, save the program.
If you select another program before saving your edited program, the sequence data in the newly
selected program will be recalled, and the sequence data you recorded will be lost.
Saving a program will overwrite the sequence data at that program location.
Tip:
When step recording begins, the display will switch to the SEQ NOTE page. The parameters
for each step can also be edited in the SEQ NOTE page during step recording.