Korg opsix, Owner'S Manual, Page: 47 / 105

47
KTRK: OP1...6 (Operator Level Key Track)
CENTER (Center Key)
This sets the note on the keyboard that is used as a
reference for keyboard tracking. The depth of the effect will
change according to how far the note you play is from the
CENTER (Center Key).
LOW (Low Slope)
Sets the depth of keyboard tracking for notes that are lower
than the CENTER (Center Key). When this is set to a
positive value, the lower the note is from the CENTER, the
greater the Operator’s output level will be. When this is set
to a negative value, lower notes will produce correspond-
ingly lower output levels.
HIGH (High Slope)
Sets the depth of keyboard tracking for notes that are higher than the CENTER (Center Key). When
this is set to a positive value, the higher the note is from the CENTER, the greater the Operator’s
output level will be. When this is set to a negative value, the higher notes will produce correspond-
ingly lower output levels.
L CRV (Low Curve)
This sets how the effect will change as you play lower notes in relation to the CENTER (Center Key).
Setting this to “LIN” will make the effect progressively stronger at a fixed ratio. Setting this to “EXP”
will make the effect gradually deeper around the CENTER (Center Key), but the effect will become
exponentially stronger for notes played further away from the CENTER (Center Key).
H CRV (High Curve)
This sets how the effect will change as you play higher notes in relation to the CENTER (Center Key).
Setting this to “LIN” will make the effect progressively stronger at a fixed ratio. Setting this to “EXP”
will make the effect gradually deeper around the CENTER (Center Key), but the effect will become
exponentially stronger for notes played further away from the CENTER (Center Key).
Center Key
High Slope
Low Slope
High Curve Low Curve