manualshive.com logo in svg

Korg opsix, Owner'S Manual, Page: 3 / 105

Share
Download
Korg opsix Owner'S Manual Download Page 3

3

4.  Using the step sequencer...........................................................29

How the sequencer works ........................................................................................................................29
Playback and recording on the step sequencer................................................................................30
Step recording ...............................................................................................................................................30
Recording motions to the motion sequencer with the knobs and sliders ..............................31
Editing sequence data ................................................................................................................................31

Parameter Guide ................................................................. 34

List of parameters ............................................................................34
HOME/ALGO .....................................................................................40

HOME/ALGO (Home/Algorithm) ............................................................................................................40

OPERATORS: MODE ..........................................................................41

MODE: OP1...6 (Operator Mode) .............................................................................................................41

OPERATORS: PITCH ..........................................................................44

PITCH: OP1...6 (Operator Pitch) ................................................................................................................44
P MOD: OP1...6 (Operator Pitch Modulation) .....................................................................................45

OPERATORS: LEVEL/EG ....................................................................46

EG: OP1...6 (Operator Level/EG) ..............................................................................................................46
KTRK: OP1...6 (Operator Level Key Track) .............................................................................................47
L MOD: OP1...6 (Operator Level Modulation) .....................................................................................48

MOD ..................................................................................................49

EG1 PITCH, EG2 FLTR (Filter), EG3 (Assignable) ..................................................................................49
LFO1 OP (Operators), LFO2 FLTR (Filter), LFO3 (Assignable) .........................................................49

FILTER ................................................................................................52

FILTER ................................................................................................................................................................52
FLTR MOD (Filter Modulation) .................................................................................................................54

EFFECT ..............................................................................................55

FX 1, 2, 3 (Effect 1, 2, 3) ...............................................................................................................................55

ARP (Arpeggiator) ............................................................................56

ARPEGGIATOR ................................................................................................................................................56

SEQ (Sequencer) ...............................................................................58

SEQUENCER ....................................................................................................................................................58
SEQ NOTE (Sequencer Note) ....................................................................................................................59
MOTION ...........................................................................................................................................................60
SEQ UTIL (Sequencer Utility) ....................................................................................................................61

VOICE ................................................................................................63

VOICE (Voice Assign) ...................................................................................................................................63

Summary of Contents for opsix










































































































Reviews:

No comments