Korg opsix, Owner'S Manual, Page: 26 / 105

26
SEQ: Used for setting how the sequencer operates, and for making detailed edits to the sequence
data.
VOICE: Set whether a sound plays in mono, poly or unison mode.
V.PATCH:
Specify the destination and depth of the effect produced by the LFO, EG and other
modulation sources.
MISC:
Used for changing other program parameters. You can copy Operators on the OP UTIL
page.
GLOBAL:
Used for configuring the overall instrument. The settings you make in this mode are
not saved to a program, but instead apply to all programs. Any changes you make will be saved
automatically.
Tip:
For details on each parameter, see the “Parameter Guide”, and for more information on the
effect parameters, see “Effect Parameter List” (→ p.84).
Saving a program
Save any programs to the opsix that you have edited.
Any edits you make will be lost if you turn off the power of the opsix or select a different program
before saving the data.
1.
Press the WRITE button.
The opsix will enter program save standby mode, and the YES and NO buttons will blink.
2.
Change the program name as necessary.
PROGRAM knob:
Changes the character at the cursor position.
SHIFT button:
Changes the type of character to input.
PAGE <
and
> buttons:
Moves the cursor. Hold down the SHIFT button while pressing the PAGE
< button to delete the character at the cursor position. Hold down the SHIFT button while
pressing the PAGE > button to insert a blank space at the cursor position.
DATA ENTRY A–F knobs:
Turning these knobs left or right is the same as pressing the PAGE <
and > buttons in succession.
3.
Press the YES button to confirm the program name.