Korg opsix, Owner'S Manual, Page: 60 / 105

60
MOTION
LANE
The opsix uses six lanes that automatically “play” the parameters (motion sequences). Select a motion
sequence lane from 1 to 6.
VALUE
This specifies the value of the selected lane and step.
CURVE
Select the curve that connects the values from the selected steps of the currently selected lane to the
next step.
You can select “Step” (no curve), “Exponential”, “Linear” or “Logarithmic”. To make smooth changes
to the parameters, select either “Exponential”, “Linear” or “Logarithmic”. On the other hand, for
parameters like “WAVE” and “PTRN”, select “Step” so that the parameter changes at the beginning of
the step in question to produce the desired effect.
DEST (Dest Scope, Destination)
This sets the parameters and groups to be changed by the motion sequence. Refer to “Motion
Destination List” (→ p.79) for details.