Korg opsix, Owner'S Manual, Page: 50 / 105

50
• LFO Wave List
SQR (Square)
SIN (Sine)
SAW DOWN (Saw Down)
SAW UP (Saw Up)
TRI (Triangle)
TRI4 (Step4 Triangle)
SAW6 DOWN (Step6 Saw Down)
SAW4 DOWN (Step4 Saw Down)
TRI6 (Step6 Triangle)
X.SAW DOWN (Exp. Saw Down)
X.TRI (Exp. Triangle)
GTR (Guitar)
X.SAW UP (Exp. Saw Up)
S/H (Sample&Hold)
S.RND LVTIME (StepRnd: Lvl&Time)
S.RND TIME (StepRnd: Time)
RND LEVEL (Random: Level)
RND LVTIME (Random:Lvl&Time)
RND TIME (Random:Time)
TRI+ (Tr)
SAW DOWN+ (Saw Down +)
SAW UP+ (Saw Up +)
SQR+ ()
Take a look at the comments below on some of the waveforms.
GTR (Guitar):
This is for guitar vibrato. The value is positive only, and when it is set using pitch,
only a pitch bend up effect will result.
S/H (Sample&Hold):
This is a typical sample/hold waveform, on which the level changes at
random in fixed intervals.
S.RND LVTIME (StepRnd: Lvl&Time):
Randomly changes the level and timing.
S.RND TIME (StepRnd: Time):
Generates a pulse wave at a random timing.
RND LEVEL (Random: Level), RND TIME (Random: Time), RND LVTIME (Random:
Lvl&Time):
Different from step-based changes, these are smoothed versions of S/H, S.RND
TIME and S.RND LVTIME that create non-linear changes. Use these for gradual random
changes.
Tr ... : This outputs only positive values, as opposed to the waveforms from
Triangle to Square that output values from −1 to +1. This is useful when you want a cyclical
pitch-up or pitch-down effect.
SPEED
When TEMPO (Tempo Sync) is on, this sets the base LFO speed as a note length.
When TEMPO (Tempo Sync) is off, this sets the LFO speed in Hz.