Kontron KISS4U, User Manual, Page: 41 / 60

KISS4U User’s Guide page 41
Figure 19: Bolts and fastening point for the card hold-down bracket
Figure 20: card hold-down bracket
5. Put/pull the expansion card into/or out from the expansion card slot of the
backplane/motherboard and fasten the mounting bracket of the expansion
card/filler bracket to the rear slot of the device.
6. Reinstall the card holder and secure it using the retaining screw (see fig. 18).
7. The PCP holder has to be installed into the appropriate hole of the card hold-
down bracket by means of the provided screw, if necessary. Fix the upper edge
of the expansion card (especially for full-length card) into the slot of the PCB
holder (height adjustable). Thus the card is firmly kept in place during high
mechanical load (shock and vibrations).
8. Close the KISS-Platform and secure the cover with the captive knurled screws.