Kontron KISS4U, User Manual, Page: 28 / 60

page 28 KISS4U User’s Guide
Filter Mat Holder
The filter mat holder is located behind the air grills of the front access door, inserted in
the air filter holder. The filter mat protects your system against dust and dirt. It can be
changed while the system is powered up. (see “Cleaning the Filter Mat“ section).
External Accessible Drive Bays
The KISS system can be equipped with up to five externally accessible drives. The
following drive bays are available:
Š
3x 5.25“ drive bay (horizontal position)
Š
2x 3.5” drive bay (vertical position)
External Accessible Slim-Line or
Internal 3.5“ Drive Bay (Option)
The KISS desktop and rackmount versions can be optionally equipped with:
Š
1x internal (not visible from the outside) 3.5“ drive bracket in horizontal position
(for IDE/SCSI/SATA hard disk drive)
or
Š
1x externally accessible slim-drive bay in horizontal position.
Note: This option is not available in systems configured as tower version.
Rear Panel
Depending on the KISS-Platform configuration ordered, the rear panel will have the
external interfaces of the integrated motherboard or SBC-board, any additional
interfaces (in system configurations with an SBC-board), the power supply unit and the
air exhaust openings.
Note: The number of KISS-Platform interfaces will vary depending on the
configuration.