Kontron KISS4U, User Manual, Page: 26 / 60

page 26 KISS4U User’s Guide
Operating Elements
ATX-power button Press this button to turn the system on or off.
Reset-button If your system no longer responds, you will have to restart it.
Press the reset button to restart your system.
Important: When you reset, all data in the main memory is erased. The system
restarts without having to turn the computer off and back on again.
WARNING
Even if you turn off the system with the ATX-power button, there is
still a standby-voltage of 5V on the SBC board / motherboard.
The system is not completely disconnected from the main power
source by turning off the with the ATX-power button.
The unit is completely disconnected from the main power source,
only when:
Š
the power cord is disconnected either from the power source
or the unit (for KISS systems with a power supply unit (PSU)
which does not have a PSU On/Off power switch).
or
Š
the On/Off power switch of the power supply unit is switched
“Off” (for KISS systems with a power supply unit (PSU)
which has a PSU On/Off power switch)
Because of this, the power cord and its connectors must always
remain easily accessible.