Kontron KISS4U, User Manual, Page: 27 / 60

KISS4U User’s Guide page 27
Interfaces on the Front Side
USB Interfaces
KISS is equipped with two USB interfaces at the front side. These connectors allow you
to connect different USB-compatible devices to the KISS-Platform.
Integrated Board Supports USB1.1 Supports USB2.0
886LCD(GV) Motherboard
5 5
886LCD-M/ATX Motherboard
5 5
MBATX-945G-VGA Motherboard
5 5
PCI-951 SBC-board
5 5
LED Indicators
Following LED indicators are located at the left front side of the KISS-Platform:
Power LED
(green) Lights up green if the system is switched on by pressing the
“ATX-power button”.
Prerequisite: The system must be attached by means of the
power cord to an appropriate power source. The power switch
of the PSU, located on the rear side of the unit, must be set to
“On” (for those systems equipped with a PSU with PSU switch).
HDD Activity LED
(orange) Indicates hard disk activity.
CAUTION
Do not press the disk eject while the disk drive LED is lit or blinking.
Front Access Door
You can protect the drives and operating elements at the front side of the KISS-Platform
from unauthorized use by means of the front access door equipped with a securing lock
mechanism (usable only when no USB devices are attached). The key should be kept
somewhere where it is not accessible to unauthorized persons.
Important: The KISS-Platform comes equipped with two keys. If the keys get
lost or damaged, then the front access door can be opened only by Kontron
Embedded Computers service personnel.