FusionClient – User Guide (Rev. 1.3)
www.kontron.com
// 23
4/
Product Description
Before working with your FusionClient, you should take a few minutes to learn about the variants, various
ports, drives, connectors and controls that are part of your FusionClient system.
The FusionClient system expands the Kontron line of Human Machine Interface (HMI). The FusionClient is
a system designed for demanding industrial applications. It integrates a workstation system with an
integrated touch screen display. The FusionClient can be configured to meet the requirements of many
demanding applications. The rugged design offers excellent mechanical stability suitable for operation in
harsh industrial environments.
Two non-detachable components comprise an FusionClient:
The computer base designed around carrier board with a COM Express® module. It is common for all
system variants.
The touch display unit offering 12.1", 15.6", 18.5" and 21.5" display sizes.
The system accommodates a new processor platform based on COMe-cBT6 (COM Express
®
module.
Depending on the implemented COM Express® module, up to two DDR3 SO-DIMM sockets are available
for up to 16 GB memory size (2, 4, 8GB, dual channel DDR3 ECC memory modules are supported).
Depending on the system configuration ordered, the Fusion client can be equipped optionally with one
external accessible SD card and following from outside not accessible drives:
1x 2.5" SATA SSD
1x mSATA SSD
1x eMMC flash drive
The power button, the LED control indicators and user interfaces such as USB (2.0), USB (3.0), DisplayPort
(DP),
LAN ports (10/100/1000 Mbps) and serial ports (RS232/RS422/RS485) are accessible on the bottom
(rear) side of the system. The functionality of the system can be extended with an optional extension port
(e.g. Fieldbus). The W-LAN and LED alarm bar options enable tracking and indicating machine issues and
their severity.
The computer base of the FusionClient is fanless with a compact aluminum chassis with cooling fins. The
air openings located on the sides of the touch display unit, and the cooling fins of the computer base and
provide air circulation for the system interior cooling, in order to prevent overheating.
Figure 1: Airflow direction
FusionClient is designed to be connected to a 24 V DC (15 V to 30 V DC operating range) mains power
supply (limited power supply) using the DC power terminal (included). An optional external AC/DC
adapter can be ordered in order to connect the FusionClient to the main power source.
When powering the FusionClient system, make
sure that the air intake and exhaust openings and
the cooling fins of the cover are not
obstructed/covered by any objects.
In order to prevent the systems overheating and
to ensure the access to the I/Os for cable
connections, leave at least 5 cm (approx. 2") of
free space on the rear top and bottom side of the
computer base
Ai
rf
lo
w
D
ire
ct
io
n
Summary of Contents for FusionClient FC 121
