CP307
Configuration
ID 34424, Rev. 3.0
Page 4 - 3
P R E L I M I N A R Y
4.
Configuration
4.1
Clearing BIOS CMOS Setup
If the system does not boot (due to, for example, the wrong BIOS configuration or wrong pass-
word setting), the CMOS setting may be cleared using the solder jumper JP1.
Procedure for clearing the CMOS setting:
The system is booted with the jumper in the new, closed position, then powered down again.
The jumper is reset back to the normal position, then the system is rebooted again.
The default setting is indicated by using italic bold.
Table 4-1: Clearing BIOS CMOS Setup
JP1
DESCRIPTION
Open
Normal boot using the CMOS settings
Closed
Clear the CMOS settings and use the default values
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com