ID 34424, Rev. 3.0
Page 1 - 15
CP307
Introduction
CUSTOMER SPECIFIC
P R E L I M I N A R Y
General
Mechanical
3U, 4HP, CompactPCI compliant form factor
Power Consumption
Dual Core LV 1.66GHz and 2GB memory: typ. 23W
For further information, refer to Chapter 5.
Temperature Range
Operational:
0°C to +60°C
Standard (depending on processor version
and airflow in the system)
-40°C to +85°C
E2 (only with Core™ Duo 1.2 GHz; without
hard disk and in the appropriate system envi-
ronment)
Storage: -55°C to +85°C
Without hard disk and without battery
-40°C to +65°C
With hard disk and without battery
Heat Sink
Depending on the processor used, there are two types of heat sinks available
with the CP307:
•
Aluminum heat sink for the CP307 with Core™ Duo 1.2 GHz, Core™ Duo
1.66 GHz and Core™2 Duo 1.5 GHz
•
Copper heat sink for the CP307 with Core™ Duo 2.0 GHz and Core™2
Duo 2.16 GHz
Climatic Humidity
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Dimensions
100 mm x 160 mm
Board Weight
320 grams (4HP variants with heat sink, with front panel but without SODIMM
module and without mezzanine boards)
Battery
3.0V lithium battery for RTC with battery socket.
Recommended type: CR2025
Temperature ranges:
Operational (load): -20°C to +70°C typical (refer to the battery manufacturer’s
specifications for exact range)
Storage (no load): -55°C to +70°C typical (no discharge)
Note ...
For a description of the additional 8HP version interfaces, refer to the Techni-
cal Specifications table in Appendix A, CP307-HDD module.
Table 1-2: CP307 4HP
Version Main Specifications (Continued)
CP307
SPECIFICATIONS
Note ...
When a battery is installed, refer to the operational
specifications of the battery as this determines the
storage temperature of the CP307 (See "Battery"
below).
Note ...
When additional components are installed, refer to
their operational specifications as this will influence the
board’s operational and storage temperature.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com