manualshive.com logo in svg

Kontron CP307, User Manual, Page: 3 / 140

Share
Download
Kontron CP307 User Manual Download Page 3

Preface

CP307

Page ii

ID 34424, Rev. 3.0

P R E L I M I N A R Y

Revision History

Imprint

Kontron Modular Computers GmbH may be contacted via the following:

MAILING ADDRESS

TELEPHONE AND E-MAIL

Kontron Modular Computers GmbH

+49 (0) 800-SALESKONTRON

Sudetenstraße 7

[email protected]

D - 87600 Kaufbeuren Germany

For further information about other Kontron products, please visit our Internet web site:
www.kontron.com.

Disclaimer

Copyright © 2006 Kontron AG. All rights reserved. All data is for information purposes only and
not guaranteed for legal purposes. Information has been carefully checked and is believed to
be accurate; however, no responsibility is assumed for inaccuracies. Kontron and the Kontron
logo and all other trademarks or registered trademarks are the property of their respective own-
ers and are recognized. Specifications are subject to change without notice.

Publication Title:

CP307: 3U CompactPCI Processor Board based on the Intel® 
Core™ Duo Processor and the Intel® Core™2 Duo Processor 
with the Intel® 945GM Express Chipset

Doc. ID: 34424

Rev.

Brief Description of Changes

Date of Issue

1.0

Initial issue

24-Nov-2006

2.0

General update

10-Aug-2007

3.0

General update, addition of a thermal characteristics graph for the 
CP307 with the Intel® Core™ Duo processor, 2.0 GHz

17-Dec-2008

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for CP307













































































































































Reviews:

No comments