Page 1 - 16
ID 34424, Rev. 3.0
Introduction
CP307
CUSTOMER SPECIFIC
P R E L I M I N A R Y
1.7
Kontron Software Support
Kontron
is one of the few CompactPCI and VME vendors providing inhouse support for most
of the industry-proven real-time operating systems that are currently available. Due to its close
relationship with the software manufacturers, Kontron is able to produce and support BSPs and
drivers for the latest operating system revisions thereby taking advantage of the changes in
technology.
1.8
Standards
This Kontron
product complies with the requirements of the following standards.
Table 1-3: Standards
TYPE
ASPECT
STANDARD
REMARKS
CE
Emission
EN55022
EN61000-6-3
--
Immission
EN55024
EN61000-6-2
--
Electrical Safety
EN60950-1
--
Mechanical
Mechanical Dimensions IEEE1101.10
--
Environmental
Vibration
(Sinusoidal)
IEC60068-2-6
5g/10-300Hz/10
acceleration / frequency range /
10 cycles per axis
Random Vibration
(Broadband)
IEC60068-2-64
(3U boards)
20-500Hz,0.05g²/500-2000Hz,
0.005g²/3.5g rms/30min./axis
frequency range1 / frequency range2 /
acceleration / cycle / duration
Permanent Shock
IEC60068-2-29
15g/11ms/500/1s
peak acceleration / shock duration half sine /
number of shocks / recovery time
Single Shock
IEC60068-2-27
30g/9ms/18/5s
peak acceleration / shock duration / number of
shocks / recovery time in seconds
Climatic Humidity
IEC60068-2-78
93% RH at 40°C, non-condensing
WEEE
Directive
2002/96/EC
Waste electrical and electronic equipment
RoHS
Directive
2002/95/EC
Restriction of the use of certain hazardous sub-
stances in electrical and electronic equipment
Note ...
The values in the above table are valid for boards which are ordered with the
ruggedized service. For further information, please contact your local Kontron
office.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com