Standalone DVR SEC-DVR304 User Manual
55
Press
to select the appropriate device.
Please note that
PTZ can only be selected for either RS-232 or RS-422/485,
but not both.
2
Model
Press
to select the appropriate model for the device.
(Please refer to NOTE 1.)
3
Baud Rate
Press
to set the baud rate.
4
Data Bit
Press
to set the data bit.
5
Stop Bit
Press
to set the stop bit.
6
Parity
Press
to set the parity.
7
DVR/Camera ID
Press
to assign the DVR/Camera an ID.
(Please refer to NOTE 2.)
NOTE 1
Model
– PTZ model
(for PTZ and PTZ+Keyboard)
, The PTZ models supported
include
Pelco D protocol Dome
,
SamSung SCC-641P
,
Kalatel Cyber Dome
,
PIH-series
,
Dynacolor
,
Bosch AutoDome
,
Video Trek
, etc.
Please note that if
PTZ+Keyboard is selected for Device Type, the Keyboard model is always
Control Protocol, and the other settings (Baud Rate, Data Bit, Stop Bit, and
Parity) are the same as the PTZ Model selected. Please also note that the
installer must be sure that the Keyboard Control Protocol and the PTZ
Protocol won’t conflict with each other.
DVR/Camera ID
– for
PTZ/Keyboard
→
the device ID for this digital video/audio
recorder, and it must not conflict with the other devices connected in the same
control port.;
