Standalone DVR SEC-DVR304 User Manual
41
5
Post-record
Press
to adjust the transition period before initiating the
recording after motion detection.
6
Alarm Out
Press
to select the motion triggered alarm output.
7
Detection
(Settings..)
This setting allows user to define the area for motion to be
detected.
Used to setup the motion detection settings, including
detection area and sensitivity, when motion is detected for this
camera. Please note that the detection area and sensitivity are
also used for the Smart Search information. There won’t be any
Smart Search information stored outside the detection area.
So, it’s better to enable the whole area if the motion detection for
the camera is disabled (and only Smart Search is used). Press
ENTER
in Settings.. to call up Motion Detection Setup (as shown)
for this camera.
8
Buzzer
Press
Enter
or
(Mouse: Left click)
to check (
) or uncheck
(-) this item. When checked, to activate the buzzer warning that
will be triggered upon motion detection.
9
Log
Press
Enter
or
to check (
) or uncheck (-) this item.
When checked, the system will record all video loss history.
A
Screen Message
To display the event message on the screen or not.
Press
Enter
or
to check (
) or uncheck (-) this item.
The
default setting is “
ˇ
” - checked.
B
Press
Enter
or
to check (
) or uncheck (-) this item.
When checked, enable this feature will trigger text or figure files
be sent to email when motion is detected.
C
FTP
Press
Enter
or
to check (
) or uncheck (-) this item.
When checked, enable this feature will trigger video files be sent
to the FTP server upon motion detection.
NOTE Detection Setting
Press
Menu > Setup > Camera > Motion Setting > Detection Settings
