KONICS KRN50 Series, User Manual

Page: 43 / 98

8� Recording
43
© Copyright Reserved KONICS Co., Ltd.
High-limit scale value and Low-limit scale value setting (in case of input
range 0-10V)
Lo Scale = 0.00
Hi Scale = 5.00, 10.00,
15.00, -10.00
Lo Scale = 10.00
Hi Scale = -10.00
Lo Scale = -5.00
Hi Scale = 5.00
When changing input type, high/low scale is changed as factory default.
(10) Scale dot position [CH Sc Point]
It is able to change decimal point position for high/low-limit scale value.
It changes decimal point position of display value (PV and SV, etc).
● Setting range: 0 / 0.0 / 0.00 / 0.000
● Factory default: 0.0 (unit: -)
In case of analog input and changing input type [CH In Type], scale
value will be initialized to factory default.
If scale value for analog input is changed when input type [CH In
Type] setup, previous record backup data is removed (Backup data
time initialization) and start saving the data from the current modified
time. Therefore please be careful for setup.
(11) Record display unit [CH Dp Unit]
This function is to set the unit for record and display.
If only input type parameter [CH In Type] is analog input, it is indicated.
In case of analog input unit setup, it is different with temp. sensor
therefore PV conversion according to unit conversion is not operated.
In case of temp. sensor input model, it is related with temp. unit setup
function therefore this parameter [CH DP Unit] is not indicated.
us0 to us9 is used to apply user font unit with 16×16 size (32byte) font.
User font unit is written through RS485 communication.
(Communication program, DAQMaster, has user unit setup and
download function.)