KONICS KRN50 Series, User Manual

Page: 67 / 98

8� Recording
67
© Copyright Reserved KONICS Co., Ltd.
(14) DI-1 function [Digital Input 1]
This function is able to operate recording start by means of external
digital input terminals (No.16, 18).
If this mode sets ‘Run’, recording operates by recording period setup
while external digital input terminal is short.
When DI-1 function operates at the first time, recording after current
time print as follows.
Korean: 현재시간 2009년03월19일 12시30분00초
English: DATE 03-19-2009 12:30:00
If this mode sets ‘Off’, no function operation.
● Setting range: Off / Run
● Factory default: Off (unit: -)
If using DI-1, front key for recording run/stop does not operate.
While recording by reservation record, DI-1 function is not able to operate
and after reservation record stop, this function is able to operate.
(15) DI-2 function [Digital Input 2]
This function is able to operate recording start by means of external
digital input terminals (No.17, 18). If this mode sets ‘Memo’, current
time(hh:mm:ss) and PV for relevant channel are recorded at the time of
inputting one signal to external digital input terminal.
It is able to operate with Memo function by means of
3
key+3sec
together. If this mode sets ‘Off’, no function operates.
● Setting range: Off / Memo
● Factory default: Off (unit: -)
If applying voltage to terminal no.16 and 17, it may cause damage to
input circuit or malfunction.
In case of no relay contact, it needs to use NPN open collector output
type contact and in case of relay contact, it needs to use contact small
current(0.2mA) is able to be flowed enough.