KONICS KRN50 Series, User Manual

Page: 53 / 98

8� Recording
53
© Copyright Reserved KONICS Co., Ltd.
If need to cancel alarm latch function by sensor break alarm(SBA)
and paper end(P.End), please press
3
+ key for over 3 sec after
returning from SBA and P.End.
※
When changing alarm output operation mode. If alarm setting mode
[CH AL Type] is changed, alarm setting value [CH AL High,
Low] automatically is initialized to maximum value and minimum
value.
※
When changing alarm output option, alarm setting value holds as
previously.
● Thermocouple Input
For setting mode of channel 1, Input type: TC-K1(-200 to 1350 ℃ ), Hi/
Lo graph range: 0 to 1000 ℃ . and channel 2: ‘Record off’. For alarm
function of channel 1, AL1 low-limit: 100 ℃ , Alarm option: None /
AL2 high-limit: 600 ℃ , Alarm option: None. For record mode, Record
mode: graph mode, Recording speed: 960mm/h, Memo period: 1min
If setup is as above, recording will be as follows.