KONICS KRN50 Series, User Manual

Page: 39 / 98

8� Recording
39
© Copyright Reserved KONICS Co., Ltd.
(5) Graph high-limit scale value [CH Hi Graph]
This function is to set high limit scale value of graph within input range
of each input type. For analog input type, this parameter is not dis-
played.
● Setting range: Graph low-limit scale value[ CH Lo Graph ] + F.S. 5%
to Max. range by each sensor input type
● Factory default: 1350(unit: Digit)
When High / Low graph setup with wrong value and pressing key
for save, error message is indicated as above. (Refer to Over Range,
Hi < Lo of 8.2.4 Display information function (1) Error) Then if pressing
key again, it returns to previous value.
Graph high/low scale value setting
In case of temp. sensor input (TC, RTD), this function is to set graph
scale value for record to chart paper and user voluntarily is able to as-
sign the recording range.
If specified indicating section is recording in detail by graph curve, it is
used.