8� Recording
38
© Copyright Reserved KONICS Co., Ltd.
(3) Temperature unit setting by input type [CH Temp Unit]
For temp. sensor input, using temp./indicating temp. unit is able to
select to Celsius(
℃
) or Fahrenheit(
℉
) voluntarily.
When temp. unit conversion (
℃
↔
℉
), PV value is changed according
to unit conversion table.
In case of analog input type, this parameter [CH Temp Unit] is not
indicated.
When temp. unit conversion, relevant bias value is initialized and
parameter setting value excluding bias value holds previous setting
value.
● Setting range:
℃
/
℉
● Factory default:
℃
(unit: -)
(4) Graph low-limit scale value [CH Lo Graph]
This function is to set low-limit scale value of graph within input range
of each input type.
● Setting range: Min. range by each sensor input type to Graph high
limit scale value[ CH Hi Graph ]- F.S. 5%
● Factory default: -200(unit: Digit)
Summary of Contents for KRN50 Series
