KONICS KRN50 Series, User Manual

Page: 50 / 98

8� Recording
50
© Copyright Reserved KONICS Co., Ltd.
(5) Paper end alarm [P�End]
During recording, if chart paper is exhausted, recording operation will
be stopped and alarm output will be ON.
When chart paper is replaced, alarm will be off automatically. (In case
of standard alarm)
(6) Alarm temperature [CH AL Lo], [CH AL Hi]
When alarm setting value setup according to relevant alarm output
operation mode, alarm output will be operated. According to selection
of alarm output operation mode [CH AL Type], relevant channel
parameter [CH AL Lo], [CH AL Hi] is interlocked and displayed.
When selecting high-limit alarm mode [ PV.Hi ], only [ CH AL High ]
is displayed.
When selecting low-limit alarm mode [ PV.Lo ], only [ CH AL Low ] is
displayed.
If input type setup [CH In Type] is changed, [CH AL High] or [CH
AL Low] value is changed to input range of input type setup [CH In
Type] automatically.
If input type is TC or RTD and alarm temp. setup is selected to [CH
AL Low], when burn operate by sensor open, alarm operation will be
on.
● Setting range: Within using/display range by input type
● Factory default: [CH AL Lo]: Low-limit scale value
[CH AL Hi]: High-limit scale value (unit: ℃ / ℉ )