Konica Minolta magicolor 7450 Service Manual Download

Page: 20 / 346

SAFETY AND IMPORTANT WARNING ITEMS

S-17

6.4

PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT

• When laser protective goggles are to be used, select ones with a lens conforming to the

above specifications.

• When a disassembly job needs to be performed in the laser beam path, such as when

working around the printerhead and PC Drum, be sure first to turn the printer OFF.

• If the job requires that the printer be left ON, take off your watch and ring and wear laser

protective goggles.

• A highly reflective tool can be dangerous if it is brought into the laser beam path. Use

utmost care when handling tools on the user’s premises.

• The Print Head is not to be disassembled or adjusted in the field. Replace the Unit or

Assembly including the Control Board. Therefore, remove the Laser Diode, and do not
perform Control Board trimmer adjustment.

Summary of Contents for magicolor 7450



























































































































































































































































































































































Search results

Summary of Contents for magicolor 7450

Reviews:

Related manuals for magicolor 7450

Brands by name

Popular brands

Konica Minolta magicolor 7450, Service Manual

Search results

Summary of Contents for magicolor 7450

Reviews:

Related manuals for magicolor 7450

Brands by name

Popular brands