Konica Minolta magicolor 7450, Service Manual

Page: 166 / 346

Field Service Ver. 1.0 May 2006 9. Menu
129
magicolor 7450
Adjustment / Setting
9.8.11 SECURITY
A. CHANGE PASSWORD
B. LOCK PANEL
Function • Sets the password used for the LOCK PANEL function.
Use
• To change the password used for the LOCK PANEL function.
0000 : Panel lock function is OFF.
0001 to FFFF : Valid password for panel lock function.
Setting
/procedure 1. Select [CHANGE PASSWORD] and press the MENU/SELECT key.
2. Set desired password (first digit) with the Up key
U
/Down key
V
and press the Right
key
Z
.
3. Repeat the above procedures to set up to fourth digit password.
• The default setting is 0000.
“0000” to FFFF
NOTE
• Make sure to set the password to something other than “0000” when the
[LOCK PANEL] function is set to [ON].
• If you forget the password, it can be initiated (0000) with [SERVICE MENU/
RESTORE PASSWORD].
P.172
Function • Protects the Menu (except the Service menu) with a password.
Use • To make the Menu (except the Service menu) impossible to change unless the cor-
rect password is entered.
OFF : Panel Lock function is OFF.
MINIMUM : Panel Lock function is ON. Protect the operation of [INTERFACE
MENU], [SYS DEFAULT MENU].
ON : Panel Lock function is ON.
Protect the operation of [PROF/PRINT MENU], [PRINT MENU],
[PAPER MENU], [QUALITY MENU], [INTERFACE MENU], [SYS
DEFAULT MENU], [CANCEL JOB MENU].
Setting
/procedure • The default setting is “OFF.”
“OFF” MINIMUM ON