Konica Minolta magicolor 7450, Service Manual

Page: 144 / 346

Field Service Ver. 1.0 May 2006 9. Menu
107
magicolor 7450
Adjustment / Setting
(4) SIZE SETTING
D. TRAY 3 / TRAY 4 / TRAY 5
(1) PAPER SIZE
(2) PAPER TYPE
E. TRAY CHAINING
F. TRAY MAPPING
(1) TRAY MAPPING MODE
Function • Sets the method to select the paper size for Tray 2.
Use • To set the paper size for Tray 2 at user's option.
Setting
/procedure • The default setting is AUTO.
“AUTO” USER SELECT
NOTE
• When selecting “USER SELECT”, the paper size will be set with [PAPER SIZE]
setting.
Function • Automatically detects the set paper size and displays it.
Use • To check the paper size.
Setting
/procedure 1. Select [PAPER SOURCE] and press the MENU/SELECT key.
2. Select desired feed tray (TRAY 3-5) and press the MENU/SELECT key.
3. Select [PAPER SIZE] and press the MENU/SELECT key.
NOTE
• TRAY3/TRAY4/TRAY5 can be selected only when one or more optional Lower
Feeder Units are installed.
Function • Sets the paper type for Trays 3 to 5.
Use • To specify the type of media loaded in Trays 3 to 5.
Setting
/procedure • The default setting is “PLAIN PAPER.”
ANY “PLAIN PAPER” RECYCLED
NOTE
• TRAY3/TRAY4/TRAY5 can be selected only when one ore more optional Lower
Feeder Units are installed.
• ANY identifies any media type.
Function • Sets auto tray switching.
Use • To specify that the printer should pull media from another tray when the specified tray
runs is empty.
Setting
/procedure • The default setting is “ON.”
“ON” OFF
Function • Selects whether or not the Tray Mapping function is used.
Use • To specify whether trays are mapped.
Setting
/procedure • The default setting is OFF.
ON “OFF”