Konica Minolta magicolor 7450 Service Manual Download Page 152

Page: 152 / 346

Field Service Ver. 1.0 May 2006

9. Menu

115

magicolor 7450

Adjustment / Setting

(3) RGB GRAY

(4) DESTINATION PROF

(5) HALFTONE

D. SIMULATION
(1) SIMULATION PROF

(2) SIMULATION INTENT

Function

• Sets the RGB gray reproduction of the graphics to be printed.

Use

• To set the gray print method that is used for printing graphics (figures).

COMPOSITE BLACK : Print gray with the toner of 4 colors CMYK.
BLACK AND GRAY

: Print black (R=G=B=0) only with K toner and print gray with

toner of 4 colors CMYK.

BLACK ONLY

: Print gray only with K toner.

Setting
/procedure

• The default setting is BLACK AND GRAY.

COMPOSITE BLACK

“BLACK AND GRAY”

BLACK ONLY

Function

• Sets the output profile.

Use

• To set the custom profile used for output.

AUTO

: Select automatically appropriate output profile that has been pre-

set at the printer with other print conditions.

Custom Profile : Custom profile that has been downloaded to the printer by user.

Setting
/procedure

• The default setting is AUTO.

“AUTO”

Custom Profile...

Function

• Sets the RGB characteristics for graphics printing.

Use

• To set each characteristic for printing graphics (figures).

Setting
/procedure

• The default setting is AS TEXT.

AS IMAGE

“AS TEXT”

Function

• Sets the simulation profile.

Use

• To set a CMYK simulation profile at implementation of the simulation.

SWOP...DIC

: Profile that has been preset at the printer.

Custom profile : Custom profile that has been downloaded to the printer by users.

Setting
/procedure

• The default setting is NONE.

“NONE” /SWOP /Euroscale /CommercialPress /TOYO /DIC /Custom Profile...

Function

• Sets the color characteristics.

Use

• To set the color characteristics at the implementation of the simulation.

RELATIVE COLOR : Reproduce the color that minimizes the color difference

between original and print by adjusting the basic color
(white.)

ABSOLUTE COLOR : Reproduce the color that maintains the absolute color within

the device reproduced color.

Setting
/procedure

• The default setting is RELATIVE COLOR.

“RELATIVE COLOR”

ABSOLUTE COLOR

Summary of Contents for magicolor 7450



























































































































































































































































































































































Search results

Summary of Contents for magicolor 7450

Reviews:

Related manuals for magicolor 7450

Brands by name

Popular brands

Konica Minolta magicolor 7450, Service Manual

Search results

Summary of Contents for magicolor 7450

Reviews:

Related manuals for magicolor 7450

Brands by name

Popular brands