Konica Minolta magicolor 7450 Service Manual Download Page 124

Page: 124 / 346

Field Service Ver. 1.0 May 2006

8. Description of the Control Panel

magicolor 7450

Adjustment / Setting

8.1.7

Help screen

This screen is displayed when the Down key

is pressed when a Normal message/Warn-

ing or Operator Call message is displayed.
The Control Panel displays the following description at the help screen.

• A graphic is displayed if necessary.

Display

Description

LCD 1

A “Question icon

” is displayed and the necessary information is displayed on the right (for

example, PREPARE NEW WASTE TONER BOTTLE).

LCD 2

LCD 3

LCD 4

A scroll bar or “

to exit” message is displayed.

• If there are several messages, a scroll bar is displayed.
• By pressing the Left key

/Right key

, a previous/next screen message is displayed.

• If all messages are displayed, “

to exit” displays on the screen.

4138F3E006DA

PREPARE

NEW WA

TONER BOTTLE

Key guidance

Question icon

Scroll bar

Left key

Right key

4138F3E020DA

TE TONER BOTTLE

P/N XXXXXXX-XXX

to exit

Necessary information

Summary of Contents for magicolor 7450



























































































































































































































































































































































Search results

Summary of Contents for magicolor 7450

Reviews:

Related manuals for magicolor 7450

Brands by name

Popular brands

Konica Minolta magicolor 7450, Service Manual

Search results

Summary of Contents for magicolor 7450

Reviews:

Related manuals for magicolor 7450

Brands by name

Popular brands