Konica Minolta magicolor 7450 Service Manual Download Page 145

Page: 145 / 346

9. Menu

Field Service Ver. 1.0 May 2006

108

magicolor 7450

Adjustment / Setting

(2) LOGICAL TRAY0-9

9.4.2

DUPLEX

9.4.3

COPIES

Function

• Specifies whether jobs received from another manufacturer’s printer driver are

printed using Tray 1 to Tray 5.

Use

• To specify the media source for print jobs using another manufacturer’s printer driver.

Setting
/procedure

• Only the default for LOGICAL TRAY 1 is PHYSICAL TRAY 1. PHYSICAL TRAY 2 is

the default for all trays other than LOGICAL TRAY 1.

PHYSICAL TRAY 1

“PHYSICAL TRAY 2”

PHYSICAL TRAY 3

PHYSICAL TRAY 4

PHYSICAL TRAY 5

NOTE
• Only the mounted Tray can be selected.

Function

• Sets duplex printing mode.

Use

• To specify duplex printing.

OFF

: Duplex print is OFF

LONG EDGE

: Duplex print is ON, long edge

SHORT EDGE : Duplex print is ON, short edge

Setting
/procedure

• The default setting is “OFF.”

“OFF”

LONG EDGE

SHORT EDGE

NOTE
• This menu is available only when a Duplex Option is installed.
• The setting in the printer driver overrides the setting in this menu.

Function

• Sets the number of prints.

Use

• To specify the number of copies of the job to be printed.

Setting
/procedure

Select [COPIES] and press the MENU/SELECT key.

Select desired print number with the Up key

/Down key

and press the MENU/

SELECT key.

• The default setting is “1” copy.

“1” copy to 9999 copies.

NOTE
• The setting in the printer driver overrides the setting in this menu.

Summary of Contents for magicolor 7450



























































































































































































































































































































































Search results

Summary of Contents for magicolor 7450

Reviews:

Related manuals for magicolor 7450

Brands by name

Popular brands

Konica Minolta magicolor 7450, Service Manual

Search results

Summary of Contents for magicolor 7450

Reviews:

Related manuals for magicolor 7450

Brands by name

Popular brands