manualshive.com logo in svg

Konica Minolta IC-206, User Manual

Share
Download
Konica Minolta IC-206 User Manual Download Page 415

Troubleshooting

13

IC-206

13-3

13

Troubleshooting

This chapter provides details on the causes for error messages to appear 
and the various operations to correct the problem.

13.1

Main error messages and their remedies

If a printing error occurs, the "Caution" indicator lights up and the message 
"Check Printer Mode" appears in the machine’s display. In this case, press 
the [Printer] key to display the Printer mode screen.

Message

Cause

Remedy

COMMUNICATION ERROR
XXXX server

Communication with the serv-
er is not possible because of 
some problem in the machine 
or the condition of the net-
work or server.

Check the transmission/re-
ception results report.
Consult with the network ad-
ministrator.

CANNOT CONNECT
XXXX server

A connection to the server 
cannot be established.

Check that the Ethernet cable 
is correctly connected. (See 
p. 2-16.) Check the parame-
ters settings on the "E-MAIL 
SETTING 1", "E-MAIL SET-
TING 2" and "NETWORK 
SETTING" menus. Consult 
with the network administra-
tor.

CANNOT GET IP
XXXX server

The IP address could not be 
assigned by the DNS or DHCP 
server.

Consult with the network ad-
ministrator.

DISCONNECT
XXXX server

The connection to the server 
was cut.

Consult with the network ad-
ministrator.

WRONG PASSWORD
XXXX server

The password is incorrect, so 
the machine could not log on 
to the server.

For the POP3 server, check 
the settings on the "E-MAIL 
SETTING 2" menu. Consult 
with the network administra-
tor.

MEM. FULL/TX CANCEL

While sending e-mail, the size 
of the image data has exceed-
ed the capacity of the memo-
ry.

Retrieve the transmission data 
stored in the memory.

MEMORY FILE FULL

While sending e-mail, the 
maximum number of stored 
files was used.

Retrieve the transmission data 
stored in the memory.

SERVER MEMORY FUL
SMTP Server

The memory of the SMTP 
server has become full while 
sending e-mail.

Consult with the network ad-
ministrator.

FTP SERVER ERROR

While uploading scan data, 
the data could not be correct-
ly uploaded to the FTP server.

Consult with the network ad-
ministrator.

Summary of Contents for IC-206









































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands