Konica Minolta 7075/FORCE 75, Service Manual

Page: 713 / 844

E-9
Note:
This process takes about 13 seconds and stops
with the completion message appears on the
screen.
(5) Enter the "Automatic gamma adjustment (1
dot)" mode and execute the automatic gamma
adjustment process.
q
Press the "Previous Screen" button once.
w
Press the "
⁄0
Auto gamma adjustment (1
dot)" button. The screen changes to the
"Auto gamma adjustment (1 dot)" menu.
e
Press the "Start" screen button to execute
the automatic gamma adjustment process.
Note:
This process takes about 10 seconds and stops
with the completion message appears on the
screen.
(6) Turn the Main switch OFF.
7. Set the Toner bottle.
(1) Open the Front door and open the Toner sup-
ply unit for 90 degree.
(2) Pull the lever (Fig. 33).
(3) Stand the Toner bottle vertically and shake it
slightly up and down. Then remove its cap put-
ting the bottle laterally and set it while meeting
the position of the clear tape and the arrow
marked on the Toner supply unit (Fig. 34).
(4) Return the lever to the original position.
(5) Close the Toner supply unit and the Front door.
Note:
Refer to the “Toner supply procedure” on the help
menu of the Operation panel, as for the Toner bot-
tle setting procedure.
8. Install the accessories on the Main body.
Mount the Ventilation duct with 2 screws and
glue the Operation manual holder with the dou-
ble coated adhesive tape and secure it with 2
bind screws (M3 x 6) on the back of the Main
body respectively (Fig. 35).
Note:
The Operation manual holder is able to mount
alternatively on the optional LT-402/LT-412.
Fig. 33
Clear tape
Arrow
Fig. 34
Operation
manual holder
Adhesive
tape
Ventilation
duct
Fig. 35