Konica Minolta 7075/FORCE 75, Service Manual

Page: 623 / 844

5 - 11
JAM CODE LIST
FNS
J72-42
J72-43
J72-44
J72-45
J72-46
J72-47
J72-48
J72-49
J72-50
J72-51
J72-81
J72-82
J72-83
During the paper feeding operation
after the 2nd folding,PS1 (passage)
is not turned off within the specified
time after it has been turned on.
PS5(punch HP) is not turned ON
within the specific time after
MC1(punch clutch) is turned ON.
PS8(exit) is not turned ON within
the specific time after leading/
trailing/side edge PS on paper
edge PS is turned ON.
PS8(exit) is not turned ON within
the specific time after the main
body paper exit PS is turned ON
(Non-Punch mode).
PS8(passage) is not turned OFF
within the specific time after it
turned ON (Non-Punch mode).
Remaining paper detected in PU
without the spacific time after PU
recieves stop operetionsignal
from the main body.
Side edge PS correspond to the
paper size is not turned ON within
the specific time after leading/
trailing/side edge PS on paper edge
PS is turned ON (Punch mode).
PS1 (passage) is not turned on
within the specified time after PSs
for front/rear/side in the paper
edge sensor have been turned on.
PS8 (exit) is not turned on within
the specified time after PS1
(passage) is turned on.
M6 (conveyance) lost synchronism.
PS33(clincher HP/F) and PS34
(stapler HP/F) are not turned ON
within the specific time after M23
(clincher F) and M24(stapler F) go
ON.
PS30(clincher HP/R) and PS31
(stapler HP/R) are not turned ON
within the specific time after M21
(clincher R) and M22(stapler R)
go ON.
PS30(clincher HP/R), PS33
(clincher HP/F), PS31(stapler HP/
R) and PS34(stapler HP/F) are
not turned ON within the specific
time after M21(clincher R),
M23(clincher/ F), M22(stapler R)
and M24(stapler/ F) go ON.
Operating
Classification
Jam
code
Cause Machine response Countermeasure
PZ-108
PU-108
PZ-108
PZ-108
FNS
PZ/main body stop
immediately.
PU/main body stops
immediately.
PZ/main body stop
immediately.
FNS/main body stops
immediately.
Remove any jammed
paper in the PZ/main
boy.
Remove jammed
paper from PU/main
body.
Remove any jammed
paper in the PZ/main
boy.
Remove jammed
paper from FNS/
main body.
PU/PZ
PZ
PZ
METHOD
REPLACEMENT
MODEL
7075
MANUAL
SERVICE HANDBOOK
REVISED EDITION DATE
Sep. 2001
PAGE
5-11