Konica Minolta 7075/FORCE 75, Service Manual

Page: 329 / 844

1 - 13
25 ADJUSTMENT
DIPSW23
DIPSW24
DIPSW28
0 – – – 0 0 0
1 Output operation when EKC user ID Enabled (counted by Disabled (registered 0 0 0
unmatching (IP-601, IP-602) other user acaunt) non-output list)
2 Toner density selection of developer *30 *30 0 0 0
3 Ditto *30 *30 0 0 0
4 Correspondence of firmware version up Older than 5.0 5.0 or later 0 0 0
of IP-601 (7075 only)
5 Tray heater control during power on OFF(all times) Turning ON 0 0 0
(7075 only) when drum
heater is OFF
6 Job memory registration of the special Disabled Enabled 0 0 0
paper setting on the bypass tray
7 Face-up ejection of the thick paper 2 to Disabled Enabled 0 0 0
sub-tray (IP)
0 HDD JOB recall operation (7085 only) Password Password and 0 0 0
Filename
1 JobEditor connection method (7085 only) PULL PUSH 0 0 0
2 – – – 0 0 0
3 – – – 0 0 0
4 Maximum number of sheets with *32 *32 0 0 0
z-folding (main tray)
5 Ditto *32 *32 1 1 1
6 Maximum number of sheets with *33 *33 0 0 0
z-f stapling (main tray)
7 Ditto *33 *33 0 0 0
0 – – – 0 0 0
1 – – – 0 0 0
2 – – – 0 0 0
3 – – – 0 0 0
4 – – – 0 0 0
5 Timing and centring adjustment in key Disabled Enabled 0 0 0
operator mode (7085 only)
6 – – – 0 0 0
7 – – – 0 0 0
DIPSW No. Bit Function 0 1
Initial Value 3
METHOD
REPLACEMENT
MODEL
7075/7085
MANUAL
SERVICE HANDBOOK
REVISED EDITION
3
DATE
Jan. 2002
PAGE
1-13
Metric Japan Inch