23
Maintenance
Always stop the machine during repair and main-
tenance, and make sure that it cannot be started by
mistake, while the repair and maintenance is carried
out. Always take care to switch off and lock the safety
switch during repair and maintenance.
A
Greasing
All the bearings of the machine have been lubricated
for life and require no further greasing.
Motors
See the maintenance instruction from the motor
producer.
Feeding Conveyor
Check regularly the tightness of the feeding conveyor
belt, to make sure that it is not slipping on the driving
roller. If necessary, tighten the feeding conveyor belt
with the adjustment brackets (A).
The feeding conveyor belt must run straight
on the rollers. Adjust with the brackets
(A), so that the feeding conveyor belt runs
straight on the rollers.
Summary of Contents for MultiDicer KMD 12
Page 58: ...58 Dimensioned Sketch KMD 12 Dimensioned Sketch KMD 18 ...
Page 59: ...59 ...
