28
Cleaning at Blocked Bottom Hopper
If the bottom hopper of the machine is blocked, it will
be possible to remove the blocking by dismounting at
(J) and remove the blocking by the hand.
Remember always to stop the machine and lock the
safety switch, before trying to remove the blocking.
J
MultiDicer model KMD12 & 18
Technical Data (50 Hz Power Supply)
Type
Max. sheet size (width x length)
Max. number of sheets per hour
(at max. 8% remains per sheet)
Materials which can be cut down
Weight of material *) (before die-cutting)
Motors:
Knife shaft and feeding roller
Conveyor belt
Blower
Max. material quantity which can be cut down
(8% remains, 800 g/m
2
, at max. sheet size)
Weight of the machine
KMD 12
106 x 76 cm
12000
paper, cardboard
90 g/m² - 800 g/m²
7,5 kW, 1400 rpm
2,2 kW, 900 rpm
0,75 kW, 2900 rpm
775 kg/h
1115 kg
KMD 18
163 x 112 cm
7000
paper, cardboard
90 g/m² - 800 g/m²
7,5 kW, 1400 rpm
2,2 kW, 900 rpm
0,75 kW, 2900 rpm
1022 kg/h
1360 kg
*) If the machine should be used for cutting down materials with a weight larger than 800 g/m
2
, it is recommended
that Kongskilde runs a test of the material in advance in order to be sure that the machine can cut down the mate-
rial in question in a satisfactory way.
Summary of Contents for MultiDicer KMD 12
Page 58: ...58 Dimensioned Sketch KMD 12 Dimensioned Sketch KMD 18 ...
Page 59: ...59 ...
