21
Start/stop of the MultiDicer
Before starting the MultiDicer system, the switch on
the control box of the MultiDicer must be turned to ON.
Control Panel
Control buttons, row A:
Choose between AUT
(automatic) and MAN (manual) operation of the
MultiDicer system.
By automatic operation the MultiDicer system is started
or stopped through the control of the die cutter.
By manual operation the MultiDicer system can be
started and stopped by using the control buttons on
the control panel.
Manual Operation
Control buttons, row B:
Start and stop of the pneu-
matic conveying equipment for the MultiDicer.
Control buttons, row C:
Start and stop of both the
MultiDicer and the pneumatic conveying equipment for
the MultiDicer system.
Conveyor Belt
Control buttons, row D:
The speed of the conveyor
belt can be adjusted on the control panel (both at
manual and automatic operation).
Control button, row E:
Machine stop for the Multi-
Dicer system.
During the start up phase the light-emitting diode
beside the control buttons will flash. When the system
is ready for operation, the diodes will shine constantly.
Adjustment of the Speed of the
Conveyor Belt
The speed of the conveyor belt must be adjusted, so
that the sheets to be cut down always can be fed into
the machine one by one. This means that the speed of
the conveyor belt must be the same as or a little higher
than the speed with which the sheets are delivered to
the machine.
------------------------------------
------------------------------------
------------------------------------
------------------------------------
------------------------------------
------------------------------------
A
B
C
D
E
Control Panel
Summary of Contents for MultiDicer KMD 12
Page 58: ...58 Dimensioned Sketch KMD 12 Dimensioned Sketch KMD 18 ...
Page 59: ...59 ...
