Komatsu PC45MR-30403, Operation And Maintenance Manual

Page: 184 / 475

• If the monitor switch is not operated for 30 seconds,
the explanation of the manual stationary regeneration
is displayed for 30 seconds, and then the screen re-
turns to the standard screen.
To display the explanation of the manual stationary re-
generation again, press the function switch “F4” on the
standard screen to display “Aftertreatment Devices
Regeneration” screen.
• When the manual stationary regeneration cannot be
performed even if the procedure is repeated from step
1, return to the standard screen and check that the en-
gine coolant temperature gauge indicates correct tem-
perature.
If it indicates low temperature (lights up in white), per-
form the warm-up operation and repeat the procedure
from step 1.
• If the manual stationary regeneration still cannot be
performed, return to the standard screen, press the
function switch “F3” to check the contents of other oc-
curred failures, stop the work and perform inspection
and maintenance.
7.
The screen shown in the figure is displayed during the
manual stationary regeneration.
It may take 30 minutes or longer to complete the manual
stationary regeneration. Do not touch any switch on the
screen nor operate the fuel control dial until the regenera-
tion is completed and the screen returns to the standard
screen.
OPERATION EXPLANATION OF COMPONENTS
3-123