Komatsu PC210, Operation & Maintenance Manual

Page: 250 / 266

5-18
PC210/240-ENG
29. INTRODUCTIONS OF ATTACHMENTS
PC240-6K, PC240LC-6K, PC240NLC-6K
For trimming of a slope and rolling compaction.
❍
can be used for general digging.
!
can be used only for light - duty digging & loading work.
x
cannot be used.
Categories of use
For general digging
: digging or loading sand, gravel, clay etc.
For light duty digging : digging or loading dry, uncaked earth and sand, mud etc.
For loading work : loading dry, loose earth and sand
• For digging or loading hard soil or soft rock, it is recommended that the strengthened bucket with high durabil-
ity and high wear resistance be employed.
NOTICE
•
When the boom is fully lowered during oblique digging, the boom interferes with the undercarriage.
Operate the boom carefully.
BUCKET AND ARM COMBINATION
SAE, PCSA CECE Without side cutters
Bucket capacity (heaped)
Width
Weight
(with side cutters)
No.
of teeth
Arm
2.0 m
(6’7'’)
3.05 m
(10’)
3
❍ ❍ ❍ ❍
3
❍ ❍ ❍
j
4
❍ ❍ ❍
!
5 j j !
5 ! ! !
0.95 m
3
0.86 m
3
1050 mm 666 kg
1.30 m 3 1.12 m 3 1450 mm 800 kg
0.49 m 3 0.45 m 3 650 mm 513 kg
1.19 m
3
1.07 m
3
1250 mm 752 kg
0.77 m 3 0.71 m 3 968 mm 616 kg
These charts are based on over-side stability with fully loaded bucket at maximum
reach.
A wide variety of buckets & attachments is available. Contact your local dealer for
more information. ❍ Material weight up to 1.8 t/m3 (3030 lb/cu.yd).
j
Material weight up to 1.5 t/m3 (2530 lb/cu.yd).
!
Material weight up to 1.2 t/m3 (2020 lb/cu.yd).
2.5 m
(8’2”)
x
x
3.5 m
(11’5”)
5-16