manualshive.com logo in svg

Komatsu D65EXi-18, Operation & Maintenance Manual

Share
Download
Komatsu D65EXi-18 Operation & Maintenance Manual Download Page 93

METHOD FOR USING SUPERVISOR MODE ................................................................................. 4-53
METHOD FOR LOCKING MENUS, BUTTONS AND SCREEN ITEMS............................................ 4-54
METHOD FOR CHANGING THE PASSWORD ............................................................................... 4-55
METHOD FOR FINISHING LOCK MODE........................................................................................ 4-57

VIEW MENU .................................................................................................................................................. 4-58

MAIN WINDOW DISPLAY....................................................................................................................... 4-58

METHOD FOR DISPLAYING MAIN WINDOW DISPLAY ................................................................. 4-58

LEFT WINDOW DISPLAY....................................................................................................................... 4-59

METHOD FOR DISPLAYING LEFT WINDOW DISPLAY ................................................................. 4-59

RIGHT WINDOW DISPLAY .................................................................................................................... 4-60

METHOD FOR DISPLAYING RIGHT WINDOW DISPLAY............................................................... 4-60

LOWER WINDOW DISPLAY .................................................................................................................. 4-60

METHOD FOR DISPLAYING LOWER WINDOW DISPLAY ............................................................. 4-60

DISPLAY OPTIONS ................................................................................................................................ 4-61

METHOD FOR DISPLAYING DISPLAY OPTIONS .......................................................................... 4-61
METHOD FOR SETTING WORKING SURFACE DISPLAY ............................................................. 4-61
METHOD FOR SETTING ALIGNMENT DISPLAY ........................................................................... 4-62
METHOD FOR SETTING AS-BUILT SURFACE DISPLAY............................................................... 4-64
METHOD FOR SETTING POINT DISPLAY ..................................................................................... 4-64
METHOD FOR SETTING SHORTCUTS DISPLAY .......................................................................... 4-65
METHOD FOR SETTING BACKGROUND COLOR DISPLAY ......................................................... 4-66
METHOD FOR SETTING DISPLAYED UNITS ................................................................................ 4-66
METHOD FOR SELECTING LANGUAGE ....................................................................................... 4-67

3DMC...................................................................................................................................................... 4-68

METHOD FOR DISPLAYING 3DMC INFORMATION....................................................................... 4-68

MAIN WINDOW DISPLAY.............................................................................................................................. 4-69

ELEVATION CONTROL KEY .................................................................................................................. 4-69
SLOPE CONTROL KEY ......................................................................................................................... 4-69
SHORTCUT ON THE MAIN WINDOW ................................................................................................... 4-71

TOGGLE AS-BUILT MODE.............................................................................................................. 4-71
START/STOP AS-BUILT UPDATES................................................................................................. 4-71
DOZING MODE SELECTION .......................................................................................................... 4-72
BLADE LOAD SELECTION ............................................................................................................. 4-72
TAKE A TOPO SHOT....................................................................................................................... 4-72

TOOLBAR ON THE MAIN WINDOW ...................................................................................................... 4-73

iB LOGO KEY .................................................................................................................................. 4-73
ZOOM IN KEY / ZOOM OUT KEY ................................................................................................... 4-73
TOGGLE MAIN VIEW ...................................................................................................................... 4-73

PAN OF MAIN MAP VIEW ...................................................................................................................... 4-74

OPERATION ON MAIN MENU....................................................................................................................... 4-75

METHOD FOR DISPLAYING GNSS INFORMATION.............................................................................. 4-75
METHOD FOR ADJUSTING CUT/FILL OFFSETS ................................................................................. 4-77
METHOD FOR CHANGING GRADE INDICATOR DISPLAY................................................................... 4-78

METHOD FOR CHANGING SLOPE DISPLAY ................................................................................ 4-78
METHOD FOR CHANGING ON GRADE ......................................................................................... 4-78
METHOD FOR CHANGING RANGE ............................................................................................... 4-78
METHOD FOR CHANGING HIGHLIGHT COLOR ........................................................................... 4-79

METHOD FOR CHANGING DISPLAY OF LIGHT BAR........................................................................... 4-79
OPERATION USING POP-UP MENU ..................................................................................................... 4-79

DISPLAY EXTENDED STATUS TEXT IN PLAN/PROFILE/SECTION.............................................. 4-79
METHOD FOR ADJUSTING CUT/FILL OFFSETS .......................................................................... 4-80
METHOD FOR NAVIGATING POINTS ............................................................................................ 4-82
METHOD FOR USING POLYLINE................................................................................................... 4-83
METHOD FOR SETTING ISOLATE SURFACE ............................................................................... 4-84

HANDLE CONTROL BOX

TABLE OF CONTENTS

4-3

Summary of Contents for D65EXi-18

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands