Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 172 / 184

However, when adjusting the lateral slope angle of Surface,
you are required to use the slope fixing function.
On “Adjust Slope” screen, check the check box of “Slope
locked”, and display “lock mark” (1) at the “slope control key”.
For “Slope locked”, see “SLOPE CONTROL KEY (4-69)”.
METHOD FOR NAVIGATING POINTS
Press a point on the main window and display the pop-up menu, and you can navigate the machine to that
point.
1.
On the main window, hold down the target point, and dis-
play the menu.
2.
Press “Navigate to point”, and select the target point.
The result of navigation to the point is displayed on the
main window.
AJD02698
AJD02699
AJD02700
OPERATION ON MAIN MENU HANDLE CONTROL BOX
4-82