Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 162 / 184

Start of as-built surface update
Stop of as-built surface update
DOZING MODE SELECTION
You can set the dosing mode by pressing “Dozing mode selec-
tion” on the main window.
For detail, see “DOZING MODE SETTINGS (3-43)”.
BLADE LOAD SELECTION
You can set the blade load mode by pressing “Blade Load se-
lection” on the main window.
For detail, see “BLADE LOAD MODE SETTINGS (3-44)”.
TAKE A TOPO SHOT
On the main window, you can set the topographic survey by
pressing “Take a topo shot”.
For detail, see “PERFORM TOPOGRAPHIC SURVEYS
(4-46)”.
MAIN WINDOW DISPLAY HANDLE CONTROL BOX
4-72