Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 174 / 184

3.
On the main window, press “iB logo key” and display the
main menu.
4.
On “Control” menu, press “Steer indication...” and select.
“Steer Indication” screen is displayed.
5.
Change the display setting of steering.
You can set additional steering information on the Section
view screen.
GRADING OPERATION TO POLYLINE
1.
On the main window, hold down Polyline for Simple Grad-
ing and display the menu.
2.
Press “Extend grade...” in “Polyline”.
The cross lines of graphics are displayed along the poly-
line.
3.
Start Simple Grading.
Repeat step 1 for other polylines.
METHOD FOR SETTING ISOLATE SURFACE
Isolate the selected triangular mesh of the active TIN data, and ignore the triangular meshes out of that isolated
one as out of the design range. You can freely change the size and length of the selected triangular mesh.
AJD02751
AJD02752
AJD02706
OPERATION ON MAIN MENU HANDLE CONTROL BOX
4-84