Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 56 / 184

When the blade automatic control is switched from on to off,
pop-up message “Auto Control Disengaged!” is displayed on
the control box screen.
REMARK
While “AUTO” is not displayed on the control box screen, the blade automatic control is not turned on.
When you restart the blade automatic control, press the Auto/Manual switch again to display “AUTO” on the
control box screen.
When the blade automatic control is automatically turned off
In the following conditions, even if Auto/Manual switch is not
pressed, the blade automatic control is automatically turned off.
• When the machine is stopped for 30 seconds or more
• When the blade edge protrudes out of the designed range.
• The number of GNSS satellites which can receive the ra-
dio waves is decreased.
• When the radio waves from the base station cannot be re-
ceived.
• When the starting switch of the machine is turned to OFF
position.
• If there is an abnormality in the system such as open circuit, etc.
MACHINE OPERATIONS AND CONTROLS OPERATION
3-42