Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 12 / 184

PRECAUTIONS FOR BLADE AUTOMATIC CONTROL
• While the automatic control of blade is in operation, the blade moves even if the operator does not operate
the blade control lever.
Before turning the automatic control of blade ON, check thoroughly that there are no persons or obstacles
in the area around the machine.
• While the automatic control of blade is in operation, if the operator operates blade control lever, this blade
lever operation is given the priority and the blade moves as operated by the operator. When the operator
stops lever operation, the automatic control of blade restarts.
While the automatic control of blade is in operation, do not release your hand from the blade control lever,
so that you can avoid the danger immediately if any.
• When performing the inspection, maintenance, moving and loading/unloading on the trailer etc., i.e. other
operation than the operation by “intelligent Machine Control” at the jobsite, turn off the automatic control of
blade, then turn off the control box power supply.
GENERAL PRECAUTIONS COMMON TO OPERATION AND MAINTE-
NANCE
SAFETY
2-4