Komatsu D65EXi-18, Operation & Maintenance Manual

Page: 151 / 184

(Profile view)
A picture and a longitudinal section of the machine seen from
the side of the machine are shown.
(Section view)
A picture of the rear side of the blade and a lateral section of
the selected surface are shown.
(Light bar)
Indicates the right and left directions of the machine.
For the change of indication of the light bar, see “METHOD FOR CHANGING DISPLAY OF LIGHT BAR
(4-79)”.
DISPLAY OPTIONS
In “Display options”, you can select various data display methods depending on the file selected for display.
METHOD FOR DISPLAYING DISPLAY OPTIONS
When displaying available display options, perform the following procedure.
1.
On the main window, press “iB logo key” and display the
main menu.
2.
On “View” menu, press “Display options” and select.
3.
Press a necessary menu.
METHOD FOR SETTING WORKING SURFACE DISPLAY
When using a surface file, perform the following procedure.
1.
On the main window, press “iB logo key” and display the
main menu.
2.
On “View” menu, press “Display options” and “Working
surface...” in order, and select.
AJD02663
AJD02664
HANDLE CONTROL BOX VIEW MENU
4-61