TP-6928 1/14
17
Section 1 System Information and Installation
1.10 Connect the Generator to the
Internet
Note:
Record the controller password and serial
number from the controller as described in
Section 1.9 before connecting the generator to
the Internet..
1.10.1 RDC2/DC2/VSC Controller
Use the RJ45 connector (provided in the kit) to connect
the Ethernet cable from the router to the cable in the
generator set’s customer connection box. See
Figure 1-9 or the generator set installation manual.
GM84094
1. Ethernet cable for OnCue Plus connection
1
Figure 1-9
Ethernet Connection, RDC2/DC2
(Model 20RESA Shown)
1.10.2 RDC/DC Controller
1. Install the Ethernet option board on the generator
set controller. See TT-1566, provided with the
OnCue
r
Plus kit, for instructions.
2. Connect the generator set to the Internet using a
network cable connected from the Ethernet board
to your router or modem.
1.11 OnCue Plus Startup
D
To use the OnCue Plus web application, use your
computer to navigate to the OnCue Plus website.
Proceed to Section 2 for instructions to set up an
account and add your generator to OnCue Plus.
D
For smart phones or tablets, obtain the Kohler OnCue
Plus app from the Apple Store (for Apple devices) or
Google Play (for Android devices). Follow the Quick
Start instructions in the app to set up an account and
add your generator to OnCue Plus. Operation of the
app is similar to using the web application as
described in Section 2 of this manual.
Note:
The activation code is only required the first time
you connect a generator set to the OnCue Plus
system. See Section 2.6.
OnCue Plus will remember your generator set and
connect to it each time you use OnCue Plus.
Summary of Contents for OnCue Plus DC
Page 2: ......
Page 6: ...TP 6928 1 14 6 Safety Precautions and Instructions Notes...
Page 18: ...TP 6928 1 14 18 Section 1 System Information and Installation Notes...
Page 43: ......