Kohler OnCue Plus DC, Operation

Page: 16 / 44

TP-6928 1/14 16 Section 1 System Information and Installation
tp6926
<---- Return
DHCP:
Enabled
Reset OnCue
Password
Reset OnCue
Password? No
S/N: 1234567
New PW: 1234
New S/N and password are
displayed for approximately
10 seconds.
Networking
Configuration
HOLD
Reset OnCue
Password? Yes
UP arrow for YES,
Down arrow for NO.
Networking---->
Information
Networking---->
Status
Status
Display
Press down arrow multiple times.
Figure 1-7 Finding the Serial Number and Password, RDC2 and VSC Controllers
1.9.4 Nameplate Serial Number
Verify that the serial number shown on the controller
display matches the serial number on the generator set
nameplate. A typical nameplate is shown in Figure 1-8.
Refer to the service views in the generator Operation
Manual for the location of the nameplate, if necessary. If
the serial numbers on the controller display and the
generator nameplate do not match, contact your
distributor or dealer.
1
1. Generator serial number
Figure 1-8 Generator Nameplate, Typical