Kohler K-3363, Manual

Page: 83 / 220

8
NAIAD ™ 333-X and 333-XSLO Push Button Cartridge
Timing Adjustment on a NAIAD Push Button Slo-Closing Cartridge
Timing can be changed by adjusting the nut located at the lower end of the dashpot.
Shorter running time = LOOSEN (counter clockwise)
Longer running time = TIGHTEN (clockwise)
Note: Do not over tighten adjustment nut as it may cause continual run-on of faucet.
333-044KJKCP - Button Assembly (Hot)
333-144KJKCP - Button Assembly (Cold)
333-244KJKCP - Button Assembly (Push)
1-043JKNF - Gasket
1-027JKNF - Seat
333-026JKRBF - Retainer
333-039JKNF - Washer
333-097JKNF - Nut
319-035JKNF - Leather Washer
395-018JKNF - Spring
319-003JKCP - Bonnet Cap
433-042JKRBF - Sleeve
244-006JKNF - Seat Washer
333-040JKNF - Cup
1-031JKNF - Washer
333-075JKNF - Dash Pot
319-012JKRBF - Washer
319-140JKNF - “O” Rings
No. 333-X NAIAD is used for all No. 333 Basin faucets and all push button stops and contains a fast
closing dashpot. Note: 333-XSLO is the same as No. 333-X, but with an additional external timing
feature located on the button and a 333-073KJKNF adjustable slow closing dashpot.
No. 625-X NAIAD operating cartridge is used for all pedal valves. Except for the 625 and 628 on
which the 628X one hole sleeve operating cartridge is used.
An adjustable slow closing model is available for both the 625-X and 628-X, which includes the
333-073KJKNF dashpot and is designated by 625-XSLO and 628-XSLO.
A
B
C
E
D
F
G
H
I
J
K
L
M
N
O
P
Timing
Nut
▼
Spec Seq#: 98
361769