Kohler K-3363, Manual

Page: 81 / 220

6
MVP ™ Metering Valve
665-PSHJKCP - Push handle
665-505JKNF - 3/32" hex socket wrench
665-309KJKNF - Red
and blue index buttons
665-116JKNF - Hex socket screw
665-015JKRBF - Spring retainer
665-105JKNPF - Stem
668-013JKNF - Return spring
665-118JKNF - Adjustment nut
665-190KJKNF - Actuator
671-XJKNF - Cartridge assembly
Cap assembly
“O” Ring
Retainer ring
665-011JKNF - Cap sealing washer
Valve sleeve
667-107JKNF - “O” Ring
Poppet/seat assembly
667-402JKNF - Large filter
667-202JKNF - Filter for use with non-dashpot bodies
Timing Adjustment on an MVP Metering Cartridge
1 With handle in place, purge cartridge of air by pushing completely down 4-8 times rapidly,
then check timing cycle.
2 Remove handle with a 3/32 allen wrench.
3 Use a standard pair of pliers (other tools may damage the adjustment nut) to change height
of adjustment nut by 1/4 turn only. Turn adjustment nut clockwise to increase time.
4 Replace handle and time flow. NOTE: TIMING MUST BE CHECKED WITH HANDLE IN PLACE
5 If more adjustment is needed, follow steps 3 and 4 until timing is right.
6 Attach handle and tighten screw. Press index button into handle opening.
Adjustment
Nut
▼
Index
button
▼
Set
screw
▼
Typical
Body
▼
with red and blue
index buttons
and set screw
Assembly
665-007JKNF - (2) “E” ring retainers
Spec Seq#: 98
361769