background image

7-4

A-61601   June 2012 

Application 
configuration

The Picture Saver Scanning System may be configured by modifying 
the PrintScan.ini file in the directory specified below for your particular 
Windows operating system. You can change the location for the output 
TIFF and JPG files (Target_Path) and adjust the folder size for burning 
CDs, 

Kodak

 Picture CDs or DVDs. The maximum folder size can be 

changed by specifying a new value for the CDFolderSize, 
PCDFolderSize and DVDFolderSize parameters in the PrintScan.ini 
file.

A3 and Legal Flatbed scanner rotation may be set using the 
FlatbedRotation parameter.

Reversing the order of the photo faceup scans may be enabled/
disabled using the ReverseFaceUp parameter.

The Scan Viewer may be enabled/disabled using the ShowViewer 
parameter. The Scan Viewer refresh rate may be slowed down using 
the ViewerDelay parameter. This will cause each image to remain 
displayed on the screen longer, therefore not all of the images scanned 
are displayed.

The width of the fill border can be changed using the FillSize parameter.

The default values for other parameters are preset to optimal values or 
set by the Scan Settings screen and generally do not need to be 
modified. 

Additional guidance for changing specific parameters may be found in 
the PrintScan.ini file.

PrintScan.ini folder location

Windows XP:

C:\Documents and Settings\All Users\Application 
Data\kds_kodak\Picture Saver System PS80

Windows Vista and Windows 7 and Windows 8:

C:\ProgramData\kds_kodak\Picture Saver System PS80

NOTE: These folders may be hidden. If so, you may need to go into the 

Windows operating system to display them.

Summary of Contents for PS80 Series

























































































Reviews: